Floor Standing Cabinets
Pushbutton Enclosures
Metering
Prewired Switchboards
Switchboards Over 630Amps
Switchboards Up To 630Amp
Distribution Boards
Home / Small Office
Server Racks
Communications
Network Racks
Government
DET
DET

A 2000 x 800 x 800mm (HxWxD) zinc coated steel, IP66 enclosure, powder coated to RAL7032. The enclosure comes complete with a 1778 gland plate (490 x 170mm opening) and is suitable for installation of a mounting pan (supplied as optional extra). The unit is supplied with a 1778 x 573 window door, 3-point Locking – Lockable L-handle (IP050) and a removable back.
Part Number:
IP77298/WG
Error: Unable to load accounts at this time.
| Dimensions | 2000 x 800 x 800mm |
|---|---|
| IP Rating | IP66 |
| Weight (kg) | 143 |
| Inclusions | 1778 x 573mm window in door, 3-point Locking – Lockable L-handle (IP050), 490 x 170mm gland opening with 1.6mm thick gland plate, C-rail mountings, Door rails, Earth strap kit, Mounting Pan – optional extra, Removable back |
| Approvals | AS/NZSS 61439, Lloyds Register #06/10007 (E2), Region D Wind rated to AS1170.2-2002: Structural design actions – Wind actions |
| Construction | Body – 1.6mm Zinc Coated Steel, RAL7032 powdercoat surface finish, Viewing window – 5.4mm thick laminated glass |
Access Plinth for floor mounting Monarch IP 800 wide by 800mm deep enclosures – steel powdercoated RAL7032
Channel Iron Plinth for floor mounting Monarch IP 800 wide by 797mm deep enclosures – Steel, Hot Dip Galvanised
Gasket – Neoprene – 4m length for use with channel iron plinth in Monarch IP and Universal DD ranges
Vent kit (louvres) 130 x 130mm – zinc coated steel, RAL7032 powdercoated to suit Monarch IP, Universal NI and Universal DD ranges
Vent kit (louvres) 260 x 260mm – zinc coated steel, RAL7032 powdercoated to suit Monarch IP, Universal NI and Universal DD ranges
Vent hood – designed to suit FAN/FIL12, IPVK and manufactured from Steel powdercoated to RAL 7032
Vent hood – designed to suit FAN23, FAN/FIL25, IPVK and manufactured from Steel powdercoated to RAL 7032
Vent hood – designed to suit FAN/FIL35, IPVK, IPVK16 and manufactured from Steel powdercoated to RAL 7032
Wall Mounting Brackets (set of 4), 316 stainless steel for Universal NI, Monarch IP and Connector TE ranges
19 inch mounting rails for Monarch IP 1958mm long and suitable for 800mm wide enclosures.