Floor Standing Cabinets
Pushbutton Enclosures
Metering
Prewired Switchboards
Switchboards Over 630Amps
Switchboards Up To 630Amp
Distribution Boards
Home / Small Office
Server Racks
Communications
Network Racks
Government
DET
DET
Ausrack Plus Server 19 inch Cabinet, 2135H x 800W x 900D, 45RU, zinc coated steel powdercoated textured matt black with split mesh (2 doors locking in the middle). The unit includes 4 x 19inch depth adjustable rails and a 4 post frame with the post inset for easier cabling. The rack also has a high rating of 1400kg static and 900kg seismic loads. Ausrack Plus Server can be bayed together with other Ausrack Plus racks using an optional accessory. Split mesh doors allow doors to be fully opened in standard width aisles include lockable wing knobs with 2 point locking and a high open area to facility equipment cooling. The roof and base include gland plates.
Part Number:
AS45U809
Error: Unable to load accounts at this time.
| Dimensions | 2135 x 800 x 900mm |
|---|---|
| RU | 45 |
| Weight (kg) | 135 |
| Inclusions | 4 inset posts, 4 x RU marked adjustable 19 inch rails, 65mm plinth, Bolt down brackets, Gland plates, Key lockable wing knobs with 2 point locking, Modular cable management facilities, Side panels (x2), Split mesh doors |
| Approvals | Australian Standards, EIA-310-D Compliant, SSI Compliant |
| Construction | 1.6mm Zinc Coated Steel, 19 inch rails, 2 point locking on doors, 4 post, 4 rail (2mm thick), 800mm wide, Adjustable rail position, Black, Gland plates, Indoor, Inset posts, Lockable wing knob, Split mesh doors, Steel side panels (1.2mm thick) |
Blanking Panel – Eziblank with tool-less installation. Supplied as 6 x 1RU plastic panels. Snap to the size you need then push onto the 19 inch rails.
Brush strips – Ezibrush with tool-less installation. Supplied as 5 x 1RU brush strips. The brush overhangs the 1RU size by 5mm.
Cable management – Horizontal Network Cabinet – 90mm finger length – 1RU – Mounts on 19 inch rails.
Cable management – Horizontal Network Cabinet – 90mm finger length – 2RU – Mounts on 19 inch rails.
Cable management – Horizontal Network Cabinet – 90mm finger length – 4RU – Mounts on 19 inch rails.
Metal Horizontal Cable management ring for 19 inch Cabinet – 120mm x 41.5mm ring. Occupies 1RU of rack space.
Metal Horizontal Cable management ring for 19 inch Cabinet – 120mm x 83mm ring. Occupies 2RU of rack space.
Plastic Horizontal Cable management ring for 19 inch Cabinet – 55mm x 30mm ring. Occupies 1RU of rack space.
Ausrack Plus Cable Zone 45RUx100Wx900D, to suit Ausrack Plus racks and cabinets 45RU high by 900mm deep.
Ausrack Plus Cable Zone 45RUx200Wx900D, to suit Ausrack Plus racks and cabinets 45RU high by 900mm deep.
Copper Earth Bar for 45RU Data Cabinets for vertical installation. Copper bar is 2000mm x 25mm x 3mm flat bar with 5.5mm holes
Fan Kit with 2 Fan Units for Ausrack, onyX and Field cabinets – 1RU – 370m3/h flowrate produced at a sound level of 53dB. These units are suitable for installation in the roof, bottom plinth of Ausrack Plus, or in the 19 inch rails.
Fan Kit with 2 Fan Units and Thermostat for Ausrack, onyX and Field cabinets – 1RU – 370m3/h flowrate produced at a sound level of 53dB. These units are suitable for installation in the roof, bottom plinth of Ausrack Plus, or in the 19 inch rails.
Fan Kit with 2 Quiet Fan Units and Thermostat for Ausrack and Field cabinets – 1RU – 120m3/h flowrate produced at a sound level of 29dB. These units are suitable for installation in the roof, bottom plinth of Ausrack Plus, or in the 19 inch rails.
Fan Kit with 4 Fan Units for Ausrack and Field cabinets – 740m3/h flowrate produced at a sound level of 62dB. These units are suitable for installation in the roof or bottom plinth of an Ausrack Plus cabinet.
Fan Kit with 4 Fan Units and a Thermostat for Ausrack and Field cabinets – 740m3/h flowrate produced at a sound level of 62dB. These units are suitable for installation in the roof or bottom plinth of an Ausrack Plus cabinet.
Fan Kit with 4 Whisper Quiet Fan Units and a Thermostat for Ausrack and Field cabinets – 240m3/h flowrate produced at a sound level of 35dB. These units are suitable for installation in the roof or bottom plinth of an Ausrack Plus cabinet.
Adjustable Foot Kit for Ausrack Plus Cabinet – pack of 4 feet. Suitable for Ausrack Plus and CQr Guardian
Ausrack Plus Server – Stabiliser Kit. Can be fitted to server racks when server are pulled out to stabilise the rack.
Ausrack Plus Baying kit consists of 4 steel brackets and all fixings required for installation.
3 Point Locking Kit for Ausrack Plus Doors – suitable for single doors only. This kit allows for an additional locking point above the standard 2 point system for extra security.
Horizontal Power Rail with 6 x 10A SAA Outlets, 10A plug – 1RU. Suitable for all 19 inch cabinets and racks.
Horizontal Power Rail with 6 x 10A SAA Outlets, 15A plug – 1RU. Suitable for all 19 inch cabinets and racks.
Horizontal Power Rail with 10 x 10A SAA Outlets, 10A plug – 2RU. Suitable for all 19 inch cabinets and racks.
Horizontal Power Rail with 10 x 10A SAA Outlets, 15A plug – 2RU. Suitable for all 19 inch cabinets and racks.
Vertical Power Rail with 6 x 10A SAA Outlets, 10A plug – 10RU. Suitable for Ausrack Plus, CQr Guardian, Ausrack TxD, Ausrack Patch, Ausrack IP and Field FC cabinets and racks.
Vertical Power Rail with 6 x 10A SAA Outlets, 15A plug – 10RU. Suitable for Ausrack Plus, CQr Guardian, Ausrack TxD, Ausrack Patch, Ausrack IP and Field FC cabinets and racks.
Vertical Power Rail with 10 x 10A SAA Outlets, 10A plug – 16RU. Suitable for Ausrack Plus, CQr Guardian, Ausrack TxD, Ausrack Patch, Ausrack IP and Field FC cabinets and racks.
Vertical Power Rail with 10 x 10A SAA Outlets, 15A plug – 16RU. Suitable for Ausrack Plus, CQr Guardian, Ausrack TxD, Ausrack Patch, Ausrack IP and Field FC cabinets and racks.
Vertical Power Rail with 10 x 10A IEC320-C13 Outlets, 10A C14 plug – 16RU. Suitable for Ausrack Plus, CQr Guardian, Ausrack TxD, Ausrack Patch, Ausrack IP and Field FC cabinets and racks.
Vertical Power Rail with 10 x 10A IEC320-C13 Outlets, 16A C20 plug – 16RU. Suitable for Ausrack Plus, CQr Guardian, Ausrack TxD, Ausrack Patch, Ausrack IP and Field FC cabinets and racks.
Vertical Power Rail with 20 x 10A SAA Outlets, 10A plug – 28RU. Suitable for Ausrack Plus, CQr Guardian, Ausrack TxD, Ausrack Patch, Ausrack IP and Field FC cabinets and racks.
Vertical Power Rail with 20 x 10A SAA Outlets, 15A plug – 28RU. Suitable for Ausrack Plus, CQr Guardian, Ausrack TxD, Ausrack Patch, Ausrack IP and Field FC cabinets and racks.
Surge Protected Horizontal Power Rail with 6 x 10A SAA Outlets, 10A Plug – 1RU. Suitable for all 19 inch cabinets and racks.
Surge Protected Horizontal Power Rail with 6 x 10A SAA Outlets, 15A Plug – 1RU. Suitable for all 19 inch cabinets and racks.
Surge Protected Vertical Power Rail with 10 x 10A SAA Outlets, 15A plug – 17RU. Suitable for Ausrack Plus, CQr Guardian, Ausrack TxD, Ausrack Patch, Ausrack IP and Field FC cabinets and racks.
Keyboard Pivot Tray Network Cabinet – for Half Extension Telecopic Shelf. 2RU high when fitted to shelf and finished in Textured matt black
Full Extension Telescopic Shelf for 19 inch Cabinet – 45Hx483Wx750D. Suitable for loads up to 20kg and for 900+mm deep racks/cabinets
Half Extension Telescopic Shelf for 19 inch Cabinet – 45Hx483Wx750D. Suitable for loads up to 40kg and for 900+mm deep racks/cabinets
Light Duty Fixed Shelf for 19 inch Cabinet – 45Hx483Wx750D. Suitable for loads up to 50kg and for 900mm racks/cabinets
Heavy Duty Fixed Shelf for 19 inch Cabinet – 45Hx483Wx750D. Suitable for loads up to 160kg and for 900mm racks/cabinets
Ausrack Plus Privacy Panel for 900mm deep cabinet – 45RU. Privacy panels do NOT include venting so segregate air flow across the racks too.
Ausrack Plus Flat Top Cover for 800mm wide, 900mm deep cabinets. Used to enclose the frames top plinth section.
Ausrack Plus Raised Top Cover for 800mm wide, 900mm deep cabinets. Features ventilation for airflow and can be used in conjunction with fans.
Vertical Cable Management Fingers (90mm) – Mounting Outside Post – 45RU – suitable for Ausrack Plus
Vertical Cable Management Fingers (150mm) – Mounting Outside Post – 45RU – suitable for Ausrack Plus