IP66 Cabinet – Ausrack IP – 2000Hx600Wx600D – Zinc coated steel – 42RU – ARIP42U66

Door stay for Monarch IP

Fan Kit with 2 Fan Units for Ausrack, onyX and Field cabinets – 1RU – 370m3/h flowrate produced at a sound level of 53dB. These units are suitable for installation in the roof, bottom plinth of Ausrack Plus, or in the 19 inch rails.

Fan Kit with 2 Fan Units and Thermostat for Ausrack, onyX and Field cabinets – 1RU – 370m3/h flowrate produced at a sound level of 53dB. These units are suitable for installation in the roof, bottom plinth of Ausrack Plus, or in the 19 inch rails.

LED light kit, 500mm wide – 12V. Suitable for Universal DD, Pilbara SP and Bowen ranges

Channel Iron Plinth for floor mounting Monarch IP 600 wide by 597mm deep enclosures – Steel, Hot Dip Galvanised

Rainhood for Monarch IP – 30H x 600W x 614mm deep, zinc coated steel powder coated RAL7032

Vent kit (louvres) 130 x 130mm – zinc coated steel, RAL7032 powdercoated to suit Monarch IP, Universal NI and Universal DD ranges

Vent hood – designed to suit FAN/FIL12, IPVK and manufactured from Steel powdercoated to RAL 7032

Vent hood – designed to suit FAN23, FAN/FIL25, IPVK and manufactured from Steel powdercoated to RAL 7032

Vent hood – designed to suit FAN/FIL35, IPVK, IPVK16 and manufactured from Steel powdercoated to RAL 7032

Set of 4 wall mounting brackets for Monarch IP enclosures in steel powdercoated RAL7032

Gland plates for Monarch IP – Zinc coated steel, 530 x 210 x 1.6mm

Gland plates for Monarch IP – 316 Stainless Steel, 530 x 210 x 1.5mm

Gland plates for Monarch IP – Brass, 530 x 210 x 6mm

Gland plates for Monarch IP – Aluminium, 530 x 210 x 2.5mm

Access Plinth for floor mounting Monarch IP 600 wide by 600mm deep enclosures – steel powdercoated RAL7032

Clamp Bracket for Monarch IP – set of 4

Gasket – Neoprene – 4m length for use with channel iron plinth in Monarch IP and Universal DD ranges

Vent kit (louvres) 260 x 260mm – zinc coated steel, RAL7032 powdercoated to suit Monarch IP, Universal NI and Universal DD ranges

Eye Bolts – Steel suitable for Monarch IP and Universal DD ranges

19 inch mounting rails for Monarch IP 1958mm long and suitable for 600mm wide enclosures.

Laptop Lectern for Monarch IP

Door rails (set of 2) for 600mm wide Monarch IP

Document Holder – A4 Plastic

Document Holder – A4 Metal

Document Holder – A4 Metal – Folder

Document Holder – A3 Plastic

Document Holder – A3 Metal

Document Holder – A3 Metal – Folder

Schedule Holder for Monarch IP – 40 line, Pebble grey (RAL7032)

Schedule Holder for Monarch IP – 150 line, Pebble grey (RAL7032)

Schedule Holder for Monarch IP – 40 line, Light grey (RAL7035)

Schedule Holder for Monarch IP – 60 line, Light grey (RAL7035)

Schedule Holder for Monarch IP – 78 line, Light grey (RAL7035)

Night latch kit

Hole plug (pack of 20) for Monarch IP – M6

Hole plug (pack of 20) for Monarch IP – M10

Hole plug (pack of 20) for Monarch IP – M13

Bolt – hex head (pack of 20) for Monarch IP – M6 x 12mm

Bolt – hex head (pack of 20) for Monarch IP – M6 x 25mm

Bolt – hex head (pack of 20) for Monarch IP – M8 x 12mm

Bolt – hex head (pack of 20) for Monarch IP – M8 x 25mm

Bolt – hex head (pack of 20) for Monarch IP – M8 x 30mm

Accessory kit seal screw (pack of 10) for Monarch IP – M8 x 40

Hex head nuts (pack of 20) for Monarch IP – M6

Hex head nuts (pack of 20) for Monarch IP – M8

Cage Nuts (pack of 20) for Monarch IP – M6

Cage Nuts (pack of 20) for Monarch IP – M8

Foam back nuts (pack of 20) for Monarch IP – M6

Foam back nuts (pack of 20) for Monarch IP – M8

Screws – taptite (pack of 20) for Monarch IP – M6 x 16mm

Tamper proof screws with security bit – M6 x 16mm (pack of 10) for Monarch IP

Flat washers (pack of 20) for Monarch IP – M6

Flat washers (pack of 20) for Monarch IP – M8

Seal washers (pack of 20) for Monarch IP – Small

Star washers (pack of 20) for Monarch IP – M6

Star washers (pack of 20) for Monarch IP – M8

Spring washers (pack of 20) for Monarch IP – M6

Spring washers (pack of 20) for Monarch IP – M8

Sealing ring (pack of 20) for Monarch IP – M6

D handle – Chrome

Earth strap kit

Touch Up Paint (300g) – Pebble Grey RAL7032

L-handle for Monarch IP and Finucane FI sunshade – lockable – key code 92269

L-handle for Monarch IP – lockable – key code CL001

L-handle for Monarch IP – lockable – key code L003

L-handle for Monarch IP and Finucane FI (replacement) – padlockable

Swing Handle for Monarch IP – Padlockable – Chromed steel

Wing knob for Monarch IP – Non-lockable

Spare key – Zinc alloy 4 way for turnbuckle locks

Set of keys for key locable wing knobs (03 type), T-handles (040 type) and L-handle (050 type) locks.

Cable management – Horizontal Network Cabinet – 90mm finger length – 1RU – Mounts on 19 inch rails.

Cable management – Horizontal Network Cabinet – 90mm finger length – 2RU – Mounts on 19 inch rails.

Cable management – Horizontal Network Cabinet – 90mm finger length – 4RU – Mounts on 19 inch rails.

Metal Horizontal Cable management ring for 19 inch Cabinet – 120mm x 41.5mm ring. Occupies 1RU of rack space.

Metal Horizontal Cable management ring for 19 inch Cabinet – 120mm x 83mm ring. Occupies 2RU of rack space.

Plastic Horizontal Cable management ring for 19 inch Cabinet – 55mm x 30mm ring. Occupies 1RU of rack space.

Copper Earth Bar for horizontal installation in 19 inch Data Cabinets – 1RU

M6 Cage nuts, screws and washers for all racks and cabinets – 50 pack

Rack Studs – Pack of 20

Rack Studs – Pack of 100

Horizontal Power Rail with 6 x 10A SAA Outlets, 10A plug – 1RU. Suitable for all 19 inch cabinets and racks.

Horizontal Power Rail with 6 x 10A SAA Outlets, 15A plug – 1RU. Suitable for all 19 inch cabinets and racks.

Horizontal Power Rail with 10 x 10A SAA Outlets, 10A plug – 2RU. Suitable for all 19 inch cabinets and racks.

Horizontal Power Rail with 10 x 10A SAA Outlets, 15A plug – 2RU. Suitable for all 19 inch cabinets and racks.

Surge Protected Horizontal Power Rail with 6 x 10A SAA Outlets, 10A Plug – 1RU. Suitable for all 19 inch cabinets and racks.

Half Extension Telescopic Shelf for 19 inch Cabinet – 45Hx483Wx450D. Suitable for loads up to 40kg and for 600mm racks/cabinets

Keyboard Pivot Tray Network Cabinet – for Half Extension Telecopic Shelf. 2RU high when fitted to shelf and finished in Textured matt black

Light Duty Fixed Shelf for 19 inch Cabinet – 45Hx483Wx450D. Suitable for loads up to 50kg and for 600mm racks/cabinets

Heavy Duty Fixed Shelf for 19 inch Cabinet – 45Hx483Wx450D. Suitable for loads up to 160kg and for 600mm racks/cabinets

Cantilever Shelf for 19 inch Cabinet – 89Hx483Wx210D (2RU high) with 10kg load rating.

Cantilever Shelf for 19 inch Cabinet – 89Hx483Wx150D (2RU high) with 10kg load rating.

Cantilever Shelf for 19 inch Cabinet – 89Hx483Wx250D (2RU high) with 10kg load rating.

Cantilever Shelf for 19 inch Cabinet – 89Hx483Wx450D (2RU high) with 10kg load rating.