Rack – Ausrack Plus Frame – 1336Hx800Wx900D – 27RU – AF27U809

Blanking Panel – Eziblank with tool-less installation. Supplied as 6 x 1RU plastic panels. Snap to the size you need then push onto the 19 inch rails.

Brush strips – Ezibrush with tool-less installation. Supplied as 5 x 1RU brush strips. The brush overhangs the 1RU size by 5mm.

Cable management – Horizontal Network Cabinet – 90mm finger length – 1RU – Mounts on 19 inch rails.

Cable management – Horizontal Network Cabinet – 90mm finger length – 2RU – Mounts on 19 inch rails.

Cable management – Horizontal Network Cabinet – 90mm finger length – 4RU – Mounts on 19 inch rails.

Metal Horizontal Cable management ring for 19 inch Cabinet – 120mm x 41.5mm ring. Occupies 1RU of rack space.

Metal Horizontal Cable management ring for 19 inch Cabinet – 120mm x 83mm ring. Occupies 2RU of rack space.

Plastic Horizontal Cable management ring for 19 inch Cabinet – 55mm x 30mm ring. Occupies 1RU of rack space.

Copper Earth Bar for 27RU Data Cabinets for vertical installation. Copper bar is 1200mm x 25mm x 3mm flat bar with 5.5mm holes

Copper Earth Bar for horizontal installation in 19 inch Data Cabinets – 1RU

Ausrack Plus Mesh Door – 27RU – 800 wide. Often used for server cabinets for datacentres where hot and cold aisles are used.

Ausrack Plus Split Mesh Door – 27RU – 800 wide. Used where aisle locations do not allow opening of full width doors.

Ausrack Plus Acrylic Window Door – 27RU – 800 wide. Often used for network cabinets.

Ausrack Plus Steel Door – 27RU – 800 wide. Often used for the rear of network cabinets where visual inspection is not required.

Fan Kit with 2 Fan Units for Ausrack, onyX and Field cabinets – 1RU – 370m3/h flowrate produced at a sound level of 53dB. These units are suitable for installation in the roof, bottom plinth of Ausrack Plus, or in the 19 inch rails.

Fan Kit with 2 Fan Units and Thermostat for Ausrack, onyX and Field cabinets – 1RU – 370m3/h flowrate produced at a sound level of 53dB. These units are suitable for installation in the roof, bottom plinth of Ausrack Plus, or in the 19 inch rails.

Fan Kit with 2 Quiet Fan Units and Thermostat for Ausrack and Field cabinets – 1RU – 120m3/h flowrate produced at a sound level of 29dB. These units are suitable for installation in the roof, bottom plinth of Ausrack Plus, or in the 19 inch rails.

Heavy Duty Roller Kit for Ausrack Plus (pack of 4)

Adjustable Foot Kit for Ausrack Plus Cabinet – pack of 4 feet. Suitable for Ausrack Plus and CQr Guardian

Ausrack Plus Server – Stabiliser Kit. Can be fitted to server racks when server are pulled out to stabilise the rack.

Ausrack Plus Baying kit consists of 4 steel brackets and all fixings required for installation.

3 Point Locking Kit for Ausrack Plus Doors – suitable for single doors only. This kit allows for an additional locking point above the standard 2 point system for extra security.

Side Panel Internal Latch Kit for Ausrack Plus supplied as a pack of 2

Side Panel Lock Kit for Ausrack Plus, keyed to 92268

Ausrack Plus Earth Lead Kit

M6 Cage nuts, screws and washers for all racks and cabinets – 50 pack

Rack Studs – Pack of 20

Rack Studs – Pack of 100

Horizontal Power Rail with 6 x 10A SAA Outlets, 10A plug – 1RU. Suitable for all 19 inch cabinets and racks.

Horizontal Power Rail with 6 x 10A SAA Outlets, 15A plug – 1RU. Suitable for all 19 inch cabinets and racks.

Horizontal Power Rail with 10 x 10A SAA Outlets, 10A plug – 2RU. Suitable for all 19 inch cabinets and racks.

Horizontal Power Rail with 10 x 10A SAA Outlets, 15A plug – 2RU. Suitable for all 19 inch cabinets and racks.

Vertical Power Rail with 6 x 10A SAA Outlets, 10A plug – 10RU. Suitable for Ausrack Plus, CQr Guardian, Ausrack TxD, Ausrack Patch, Ausrack IP and Field FC cabinets and racks.

Vertical Power Rail with 6 x 10A SAA Outlets, 15A plug – 10RU. Suitable for Ausrack Plus, CQr Guardian, Ausrack TxD, Ausrack Patch, Ausrack IP and Field FC cabinets and racks.

Vertical Power Rail with 10 x 10A SAA Outlets, 10A plug – 16RU. Suitable for Ausrack Plus, CQr Guardian, Ausrack TxD, Ausrack Patch, Ausrack IP and Field FC cabinets and racks.

Vertical Power Rail with 10 x 10A SAA Outlets, 15A plug – 16RU. Suitable for Ausrack Plus, CQr Guardian, Ausrack TxD, Ausrack Patch, Ausrack IP and Field FC cabinets and racks.

Vertical Power Rail with 10 x 10A IEC320-C13 Outlets, 10A C14 plug – 16RU. Suitable for Ausrack Plus, CQr Guardian, Ausrack TxD, Ausrack Patch, Ausrack IP and Field FC cabinets and racks.

Vertical Power Rail with 10 x 10A IEC320-C13 Outlets, 16A C20 plug – 16RU. Suitable for Ausrack Plus, CQr Guardian, Ausrack TxD, Ausrack Patch, Ausrack IP and Field FC cabinets and racks.

Surge Protected Horizontal Power Rail with 6 x 10A SAA Outlets, 10A Plug – 1RU. Suitable for all 19 inch cabinets and racks.

Surge Protected Horizontal Power Rail with 6 x 10A SAA Outlets, 15A Plug – 1RU. Suitable for all 19 inch cabinets and racks.

Surge Protected Vertical Power Rail with 10 x 10A SAA Outlets, 15A plug – 17RU. Suitable for Ausrack Plus, CQr Guardian, Ausrack TxD, Ausrack Patch, Ausrack IP and Field FC cabinets and racks.

Cantilever Shelf for 19 inch Cabinet – 89Hx483Wx360D (2RU high) with 10kg load rating.

Cantilever Shelf for 19 inch Cabinet – 89Hx483Wx210D (2RU high) with 10kg load rating.

Cantilever Shelf for 19 inch Cabinet – 89Hx483Wx150D (2RU high) with 10kg load rating.

Cantilever Shelf for 19 inch Cabinet – 89Hx483Wx250D (2RU high) with 10kg load rating.

Cantilever Shelf for 19 inch Cabinet – 89Hx483Wx350D (2RU high) with 10kg load rating.

Cantilever Shelf for 19 inch Cabinet – 89Hx483Wx450D (2RU high) with 10kg load rating.

Keyboard Pivot Tray Network Cabinet – for Half Extension Telecopic Shelf. 2RU high when fitted to shelf and finished in Textured matt black

Full Extension Telescopic Shelf for 19 inch Cabinet – 45Hx483Wx750D. Suitable for loads up to 20kg and for 900+mm deep racks/cabinets

Half Extension Telescopic Shelf for 19 inch Cabinet – 45Hx483Wx750D. Suitable for loads up to 40kg and for 900+mm deep racks/cabinets

Light Duty Fixed Shelf for 19 inch Cabinet – 45Hx483Wx750D. Suitable for loads up to 50kg and for 900mm racks/cabinets

Heavy Duty Fixed Shelf for 19 inch Cabinet – 45Hx483Wx750D. Suitable for loads up to 160kg and for 900mm racks/cabinets

Side Cover Panel for Ausrack Plus 900mm deep cabinet – 27RU. Side panels include venting and are easy to fit using locating pins and slam latches.

Ausrack Plus Flat Top Cover for 800mm wide, 900mm deep cabinets. Used to enclose the frames top plinth section.

Ausrack Plus Raised Top Cover for 800mm wide, 900mm deep cabinets. Features ventilation for airflow and can be used in conjunction with fans.

Cable tray for an 27RU, 19 inch Cabinet – 1102Hx150W

Cable tray for an 27RU, 19 inch Cabinet – 1102Hx300W

Cable tray for an 27RU, 19 inch Cabinet – 1102Hx450W