Filter, 250H x 250W x 26D, Gaskets, All Fixings for Assembly, colour, RAL7035 – TX-FIL25XN0B

Filter unit – 250H x 250W x 26D,RAL7035. IP54 protection rating with increase to IP55 with optional EU5 filter. Filter can be installed with TX-FAN23BN0B, TX-FAN23UN0B, TX-FAN23VN0B, TX-FAN25BN0B, TX-FAN25UN0B, TX-FAN25VN0B fans and can be paired with a thermostat.

Part Number:

TX-FIL25XN0B

Error: Unable to load accounts at this time.


Download PDF of this page
Details
IP Rating

IP54

Inclusions

All Fixings for Assembly, Gaskets

Construction

Easy to change and maintain filter with accessible screwdriver entry, IP55 rating available with optional EU5 filters, Snap-in fastening system requires no fastening screws

Colour

RAL7035

Cutout

219H x 219W

Height

250

Features
  • Fans and filters with air flow capacities from 57 to 580m³/h.
  • Fan units are reversible to pressurise or evacuate air out of the enclosure as required.
  • Service life exceeds 45,000 hours.
  • Over current protection is built into the motor.
  • All fans are bearing supported and rated for 100% duty cycle.
  • Operating temperature -10ºC to 55ºC.
  • Pair with a thermostat to enhance energy efficiency and extend filter material lifespan.
  • Other supply options available on request.
Downloads
Accessories
Category
Vent Hood
Reset

TX-AAFFH25

Filter EU5 cloth, for TX-FAN23, TX-FAN25, TX-FAN28, TX-FIL25

TX-AAFFN25

Filter EU4 cloth, for TX-FAN23, TX-FAN25, TX-FAN28, TX-FIL25

IPVH25

Vent hood – designed to suit FAN23, FAN/FIL25, IPVK and manufactured from Steel powdercoated to RAL 7032

IPVH25/A

Vent hood – designed to suit FAN23, FAN/FIL25, IPVK/A and manufactured from aluminium powdercoated to RAL 7035

IPVH25/LG

Vent hood – designed to suit FAN23, FAN/FIL25, IPVK/LG and manufactured from Steel powdercoated to RAL 7035

IPVH25/RO

Vent hood – designed to suit FAN23, FAN/FIL25, IPVK/RO and manufactured from Steel powdercoated to X15 orange

IPVH25/S

Vent hood – designed to suit FAN23, FAN/FIL25, IPVK/S and manufactured from 316 stainless steel

IPVH25/SRO

Vent hood – designed to suit FAN23, FAN/FIL25, IPVK/SRO and manufactured from 316 stainless steel powdercoated to X15 orange

TX-AAFTO12

Thermostat, 0-60C temperature settings, Normally Open, 10A/250V AC

TX-AAWTC10

Thermostat, 0-60C temperature settings, Normally Closed, 10A/250V AC

TX-AAWTS10

Thermostat, 0-60C temperature settings, Single Pole Single Throw, 10A/250V AC