Floor Standing Cabinets
Pushbutton Enclosures
Metering
Prewired Switchboards
Switchboards Over 630Amps
Switchboards Up To 630Amp
Distribution Boards
Home / Small Office
Server Racks
Communications
Network Racks
Government
DET
DET
A 1800 x 600 x 500mm (HxWxD) 1578 x 373, IP66 enclosure, powder coated to N4 surface finish. The enclosure comes complete with a 1578 gland plate (490 x 170mm opening) and is suitable for installation of a mounting pan (supplied as optional extra). The unit is supplied with a 1578 x 373 window door, 3-point Locking – Lockable L-handle (IP050) and a removable back.
Part Number:
IP69215/SRO/WG
Error: Unable to load accounts at this time.
| Dimensions | 1800 x 600 x 500mm |
|---|---|
| IP Rating | IP66 |
| Weight (kg) | 91 |
| Inclusions | 1578 x 373mm window in door, 3-point Locking – Lockable L-handle (IP050), 490 x 170mm gland opening with 1.5mm thick gland plate, C-rail mountings, Door rails, Earth strap kit, Mounting Pan – optional extra, Removable back |
| Approvals | AS/NZSS 61439, Lloyds Register #06/10007 (E2), Region D Wind rated to AS1170.2-2002: Structural design actions – Wind actions |
| Construction | Body – 1.5mm 316 Stainless Steel, Viewing window – 5.4mm thick laminated glass, X15 Orange powdercoat surface finish |
Rainhood for Monarch IP – 30H x 600W x 514mm deep, 316 stainless steel powdercoated X15 orange
Access Plinth for floor mounting Monarch IP 600 wide by 500mm deep enclosures – stainless steel powdercoated X15 orange
Channel Iron Plinth for floor mounting Monarch IP 600 wide by 497mm deep enclosures – Steel, Hot Dip Galvanised
Gasket – Neoprene – 4m length for use with channel iron plinth in Monarch IP and Universal DD ranges
Vent kit (louvres) 130 x 130mm – 316 stainless steel, X15 orange powdercoated to suit Monarch IP, Universal NI and Incline SR ranges
Vent kit (louvres) 260 x 260mm – 316 stainless steel, X15 orange powdercoated to suit Monarch IP, Universal NI and Incline SR ranges
Vent hood – designed to suit FAN/FIL12, IPVK/SRO and manufactured from 316 stainless steel powdercoated to X15 orange
Vent hood – designed to suit FAN23, FAN/FIL25, IPVK/SRO and manufactured from 316 stainless steel powdercoated to X15 orange
Vent hood – designed to suit FAN/FIL35, IPVK/SRO, IPVK16/SRO and manufactured from 316 stainless steel powdercoated to X15 orange
Wall Mounting Brackets (set of 4), 316 stainless steel for Universal NI, Monarch IP and Connector TE ranges