Enclosure – Lambert LB – 1368Hx1496Wx502D – Stainless Steel – LB101440/S

An IP66, 316 stainless steel, 30 degree sloping roof, double door enclosure with sunshades designed for rugged, dusty industrial applications. The enclosure comes complete with a metal 930 x 1330 (HxW) – 2mm thick mounting pan and two 600 x 270mm x 3mm brass gland plate (540 x 210mm (2 off) opening). The enclosure comes complete with top, door, sides and rear sunshades, top and bottom mounting flanges for frame mounting, door rails, stainless steel padlockable swing handle (SP/LCK/S) – 2 off removable doors (with pintle hinges) and 3 point locking with padlockable swing handles and Locksock for dust and water protection.

Part Number:

LB101440/S

Error: Unable to load accounts at this time.


Download PDF of this page
Details
Dimensions

1000 x 1400 x 400mm (1368mm total height)

IP Rating

IP66

Weight (kg)

320

Inclusions

2mm steel mounting pan – 930 x 1330 (HxW) – white, Door rails, Door stays, Earth strap kit, Gland Opening – 540 x 210mm (2 off) gland opening with 3mm thick brass plates, Stainless steel padlockable swing handle (SP/LCK/S) – 2 off, Sunshades

Approvals

AS/NZS 61439, Lloyds Register #06/10007 (E2)

Construction

Body – 1.5mm 316 Stainless Steel, N4 Surface Finish

Features
  • IP66 protection rating – more info on IP ratings
  • Removable doors with pintle hinges
  • Sunshades on top, doors, sides and rear
  • 30° sloping roof to prevent build up of water and solids
  • LockSock protective lock cover
  • Door opening angle of 110º with door stay fitted
  • 3-point locking
  • Easy to install with top and bottom mounting flanges designed to allow mounting on a frame
  • Robust lifting lugs
  • Flat faced gutter
  • Single full width rear mounting pan
  • Optional side mounting pans that don’t obstruct rear mounting pan
  • Region D wind rated to AS1170.2-2002: Structural design actions – Wind actions
Downloads
Accessories
Category
Gland Plate
Mounting Pan
Lock
Reset

LBSMP1040

Side Mounting Pan for Lambert LB

LBGA62/6

Gland Plate – aluminium – 600 x 270 (HxW), 6mm thick. Suitable for Lambert LB

SP/LCK/S

Swing Handle – Padlockable for Pilbara SP or Lambert LB – 316 stainless steel

SP/LCK/DC

Locksock for Pilbara SP or Lambert LB locks – plastic

LPC221

Lockable Power Case, a segregated area inside an enclosure that is used to prevent contact with live parts. 233H x 215W x 167D and complete with a Lockable Wing Knob, Gas Strut and manufactured from 1.6mm thick Zinc Coated Steel, Powdercoated Pearl White Gloss

LPC231

Lockable Power Case, a segregated area inside an enclosure that is used to prevent contact with live parts. 233H x 315W x 167D and complete with a Lockable Wing Knob, Gas Strut and manufactured from 1.6mm thick Zinc Coated Steel, Powdercoated Pearl White Gloss

LPC261

Lockable Power Case, a segregated area inside an enclosure that is used to prevent contact with live parts. 233H x 615W x 167D and complete with a Lockable Wing Knob, Gas Strut and manufactured from 1.6mm thick Zinc Coated Steel, Powdercoated Pearl White Gloss