Enclosure – Lambert LB – 1368Hx1096Wx502D – Stainless Steel – LB101040/S

An IP66, 316 stainless steel, 30 degree sloping roof enclosure with sunshades designed for rugged, dusty industrial applications. The enclosure comes complete with a metal 930 x 930 (HxW) – 2mm thick mounting pan and 900 x 270mm x 3mm brass gland plate (840 x 210mm opening). The enclosure comes complete with top, door, sides and rear sunshades, top and bottom mounting flanges for frame mounting, door rails, stainless steel padlockable swing handle (SP/LCK/S) removable doors (with pintle hinges) and 3 point locking with padlockable swing handles and Locksock for dust and water protection.

Part Number:

LB101040/S

Error: Unable to load accounts at this time.


Download PDF of this page
Details
Dimensions

1000 x 1000 x 400mm (1368mm total height)

IP Rating

IP66

Weight (kg)

300

Inclusions

2mm steel mounting pan – 930 x 930 (HxW) – white, Door rails, Door stays, Earth strap kit, Gland Opening – 840 x 210mm gland opening with 3mm thick brass plate, Stainless steel padlockable swing handle (SP/LCK/S), Sunshades

Approvals

AS/NZS 61439, Lloyds Register #06/10007 (E2)

Construction

Body – 1.5mm 316 Stainless Steel, N4 Surface Finish

Features
  • IP66 protection rating – more info on IP ratings
  • Removable doors with pintle hinges
  • Sunshades on top, doors, sides and rear
  • 30° sloping roof to prevent build up of water and solids
  • LockSock protective lock cover
  • Door opening angle of 110º with door stay fitted
  • 3-point locking
  • Easy to install with top and bottom mounting flanges designed to allow mounting on a frame
  • Robust lifting lugs
  • Flat faced gutter
  • Single full width rear mounting pan
  • Optional side mounting pans that don’t obstruct rear mounting pan
  • Region D wind rated to AS1170.2-2002: Structural design actions – Wind actions
Downloads
Accessories
Category
Gland Plate
Mounting Pan
Lock
Reset

LBSMP1040

Side Mounting Pan for Lambert LB

LBGA92/6

Gland Plate – aluminium – 900 x 270 (HxW), 6mm thick. Suitable for Lambert LB

SP/LCK/S

Swing Handle – Padlockable for Pilbara SP or Lambert LB – 316 stainless steel

SP/LCK/DC

Locksock for Pilbara SP or Lambert LB locks – plastic

LPC221

Lockable Power Case, a segregated area inside an enclosure that is used to prevent contact with live parts. 233H x 215W x 167D and complete with a Lockable Wing Knob, Gas Strut and manufactured from 1.6mm thick Zinc Coated Steel, Powdercoated Pearl White Gloss

LPC231

Lockable Power Case, a segregated area inside an enclosure that is used to prevent contact with live parts. 233H x 315W x 167D and complete with a Lockable Wing Knob, Gas Strut and manufactured from 1.6mm thick Zinc Coated Steel, Powdercoated Pearl White Gloss

LPC261

Lockable Power Case, a segregated area inside an enclosure that is used to prevent contact with live parts. 233H x 615W x 167D and complete with a Lockable Wing Knob, Gas Strut and manufactured from 1.6mm thick Zinc Coated Steel, Powdercoated Pearl White Gloss